Manually Program Black RF Remote
In order to control other devices with your Remote Control (TV, DVD and AUX buttons), you need to tell the remote control what types of devices you have. Follow these steps:
- Power on the device you want to program and locate the 4-digit set up code using the look-up tool:
Tips:
- If you do not find the brand of your device, please refer to Using the Search Function to Program Your Remote, or Using the Learning Feature to Program Your Remote.
- If you have an integrated or combo unit such as a TV/DVD, each component of the unit may need to be setup separately by setting up both the TV and DVD buttons.
- While holding the button (TV, DVD, or AUX), press the OK button for one second.
- Release both buttons, all of the buttons (TV, DVD, or AUX) will flash then the selected button light will stay lit.
- Enter the 4-digit code by pressing the numerical keys (0-9). The selected button light will blink for each digit entry and will remain off after the entry of the fourth digit, indicating a successful setup.
- Point the remote control at the selected device and press the power button once. The device should turn off. If the device stayed on, repeat the steps 2 through 5 trying each code for your brand until you find the correct code.
Repeat the steps to program another device.
Note:
If an invalid code is entered or no button is pressed at all for 30 seconds, the TV, DVD, or AUX button light flashes for three seconds and turns off. The remote control returns to normal operation and you will need to start over from step 2 to setup the device.
